Polished Concrete
![](https://concretesealers.co.nz/wp-content/uploads/2018/11/armourtech-floor-logo-1-1024x300.jpg)
Be amazed at How Little it took to get such a Fabulous Look!
Reduce the cost and time to produce your Armourtech Masterpiece floor
Polished concrete floors are much like Art and no two floors are the same. The approach to achieve a Armourtech Masterpiece floor can vary for each floor. That is why Armourtech Floor is the best choice to create and improve the Performance and Appearance of your polished concrete floor and produce an Armourtech Masterpiece floor.
Discover how to reduce cost and time, boost the performance of your polished concrete, protect and produce an Attractive, Functional, Durable and Affordable floor finishes with Armourtech Floor technology.
Using the unique properties of Silica breakthrough technology new concrete polishing alternatives have been perfected. Achieve a higher grit shine with lower grit abrasives.
Armourtech Floor leaves polished concrete hard, easy to maintain, and light reflective. The Right Gloss at the Right Price.
Armourtech is Water Based.
View Armourtech Masterpiece Floor Processes below:
Armourtech Exposed Aggregate – polished concrete
Armourtech Hardwear Floor – no Grinding required
Armourtech Power Trowel Finishing -Amazing
Armourtech Pin Hole filler using Armourtech Densifier:
When the Armourtech Densifier is used the it quickly builds up density in the surface and may actually fill in finer scratch patterns.
ARMOURTECH Densifier can be used as a grinding fluid while polishing Wet which will aid in pinhole filling.
1. Dilute Densifier concentrate with clean water anywhere from 1:4 to 1:10
2. Create a slurry in front of the machine
3. Do a couple of steps with the same slurry. Extract, clean
4. Densify as normal
5. Continue polishing to finishing grit
7. Clean
8. Burnish dry
By using ARMOURTECH Densifier before the 80grit step, helps reduce micro pitting.
or
Add diluted ARMOURTECH Densifier as a flood coat and leave it there overnight. The silica will bond with itself and fill capillaries and pores in the concrete. This will improve the Polishing process and results.
Armourtech Densifier benefits:
- No need to work in with broom, simply spray apply
- ARMOURTECH Densifier will not ‘Whiten’ even if over applied.
- Single application
- No waiting for cure. Reaction begins quickly, within 10 to 15 minutes.
- No need for further applications of ARMOURTECH product
- No need to remove any excess
- Does Not become slippery when it comes into contact with water.
- In the ARMOURTECH System any cementitious filler can be used.
- ARMOURTECH Densifier creates a denser surface.
- Does not require Calcium Hydroxide to react.
- Coverage typically 15m2 per ltr
- Achieve a higher grit reflectivity from lower grit abrasives – reduces grinding cost